Network design and planning

Plan a new network before you build it

Updated

A new office, a branch, a closet refresh: lay out the sites, closets and VLANs, give every device its address, and cable it on the page. NetworkSketch checks the IP plan while it's still a drawing, and hands the installer a cabling schedule and a VLAN table. When the work is done, the same file is the as-built.

From a blank page to the installer's paperwork

  1. 1

    Lay out the sites and VLANs

    Buildings, MDFs and IDFs, racks, and VLAN areas with their ID, subnet, gateway and DHCP. Drop each device where it will live; move an area and everything in it moves along.

  2. 2

    Address it

    Give devices their management IPs. The network check flags duplicates and addresses outside their VLAN's subnet as you go. Size the subnets first with the subnet calculator and VLSM planner.

  3. 3

    Cable it on the page

    Every link has a media type, speed, VLANs and the port at each end: copper, single-mode or multi-mode fiber, DAC, wireless bridges, WAN circuits. The media type key builds itself.

  4. 4

    Hand it over

    One PDF with the diagram, a device inventory, the cabling schedule (both ends, ports, media, speed, cable ID, length) and the VLAN / subnet table, under your title block and logo.

  5. 5

    Keep it as the as-built

    Fill in serials, final ports and test results after install, add a change log line, mark it verified. No second drawing to keep in sync.

Mistakes it catches while they're cheap

The mistakeWhere it's caught
Two devices given the same IPNetwork check, across every page of the design
A device addressed outside its VLAN's subnetNetwork check (from the VLAN area's subnet)
Overlapping subnets in the addressing planThe free IP plan checker
The same switch port used for two cablesNetwork check
A device drawn but never cabledNetwork check
More PoE devices than the switch can powerThe free PoE budget calculator
A fiber run too long or too lossy for the opticThe free fiber loss calculator and distance chart
Not enough rack space or power in the closetThe free rack elevation planner

Who plans with it

MSPs and VARs

Design the customer's new site for the proposal, then deliver the as-built from the same file after install.

IT teams

Plan an office move, a new branch or a closet refresh, and give the cabling contractor a schedule they can follow.

Consultants

Hand the client a design document with your logo: diagram, inventory, cabling schedule and VLAN plan in one PDF.

Students and labs

Practice CCNA and Network+ topologies. The CCNA lab template fits the Free plan, so labs stay free to build and export.

Questions

Can I design a network that doesn't exist yet?

Yes. Nothing in NetworkSketch connects to your devices: you place and cable them yourself, so a planned network and an existing one are drawn the same way. Fill in what you know now (models, VLANs, subnets) and the rest as the design firms up.

Does it check the IP plan?

The network check flags duplicate IPs, addresses outside their VLAN's subnet, invalid IPs and CIDRs, ports used twice and devices with no cable. For a list of subnets, the free IP plan checker also finds overlapping ranges.

Does it do wireless coverage or heatmaps?

Not yet. Access points go on the diagram with their SSIDs and switch ports, but there's no RF heatmap; use a predictive survey tool for coverage.

What does it cost?

The 14-day trial has every feature, with no card. After it, the Free plan keeps designs of up to 10 devices on one page, exported as PNG; Pro, at $9 a month billed yearly or $15 month to month, has no limits and adds the PDF with the cabling schedule and VLAN table. Pricing.

Draw the network before you order it.

Open the editor with a blank page, or start from a campus, SD-WAN or data center template.

Start a design